Spice Rack Revamp

Happy 2014! Now that the holiday season is over, we are going full force trying to finish up odds and ends around the house before our housewarming party in a few weeks. I’m planning to accomplish many lingering tasks, so the blog will (hopefully) be in a flurry of activity as well.

A few years ago, my grandfather gave me a spice rack that belonged to my grandmother who had recently passed away. Although I couldn’t use it at the time due to communal living, I knew that in the future I would love to have a piece of my grandmother’s kitchen in our home. Fast forward to moving into our own home two months ago, and the spice rack resurfaced out of the depths of my storage unit.

IMG_0700The spice rack was in perfect working order (it has a lazy susan on the bottom) but was a little outdated. Nothing a little spray paint can’t fix! Because ultimately, I’d like to paint the kitchen a light blue color, I thought I’d start small and paint the spice rack a robin’s egg blue. I got Valspar Paint + Primer in one, and I don’t think I’ll ever go back to regular spray paint again! It goes on evenly and smoothly and it’s only $1 more than regular spray paint at Lowe’s. Totally worth the extra dollar!

IMG_0704

IMG_0703

IMG_0705Our backyard gets almost zero sunlight so the color looks weird here…

IMG_0721

I added some washi tape to the lids and labeled the spices I had on hand. I like the washi tape because I can always change the labels if I decide to mix up my spice repertoire.

IMG_0725

IMG_0720

The finished product in it’s new home! Right next to the sadddd knives that can’t even cut a bell pepper. Let’s just say a new knife block will be first on the wedding registry list, even though I’m fairly sure we won’t last 5.5 months using butter knives to cut things.

I’m off to go work on the “lady cave!” The whole point of that room is for me to work on projects and write blog posts in there; let’s cross our fingers that I’ll be writing the next post from my pretty new ghost chair!

Advertisements

Christmas Countdown

IMG_0715It has been sheer insanity the last 2 months. We made an offer on a house, closed escrow exactly 30 days later, and then filled the house with necessary items like a couch, washer, and dryer. It’s been expensive, fun, rewarding, and sometimes overwhelming, but we couldn’t be happier and are so happy to finally have a place to call our own! That being said, I have a handful of half-finished blog projects (blojects?) that are in disarray in what will eventually be my craft room/office. I’m currently accepting name suggestions for what to call this room, which for now is lovingly titled the “Lady Cave.”

imageNow on to your regularly scheduled blogging…

It’s officially Christmas-time! Although my Christmas tree was up and fully decorated before the Thanksgiving pumpkin pie had even settled, last week’s 5 inches of snow was just the extra push I needed to go Christmas crazy. Let’s see how many times I can say “Christmas” in this post. Ready, go.

I enjoy a good Christmas countdown, but something about those red-and-grean paper chain countdowns doesn’t scream “I’m a functional adult in the real world!” And since I’m not a huge fan of advent calendars, I thought I’d make something a a little different.

Materials needed:

White frame with a mat

Scrapbook paper – any color or theme that strikes your fancy

Vinyl letters- I found this one for $0.70 at a craft store after Christmas last year, you could probably make this with a Cricut or similar machine

Chalkboard paint, chalk

Steps:

IMG_0708Frame the piece of scrapbook paper

IMG_0710Adhere the vinyl letters to the glass frame

IMG_0712Add chalkboard paint (mine was another piece of vinyl)

IMG_0714Use those math skills and figure out how many days are left until Christmas…

Now ideally, you would update this number daily but I’ll be honest, I took these pictures on Sunday and it’s yet to change from “17.” Oops. I’ll try to be better, as this is the first Christmas tradition for our little family of 2 and I’m excited to continue every year.

Hope you enjoy this quick and easy Christmas art!

DIY Personalized “Be My Bridesmaid” Wine Labels

I have officially completed my first wedding-related project and I’ve been waiting to blog this for over a month! While I was still working on the Central Coast and basically living out of a suitcase, I was very lonely and bored. Unfortunately, all my crafting supplies were sitting in storage 7 hours away. Bad idea! I obviously had a mental breakdown and being the great fiancé he is, Casey told me to go buy new craft supplies and do my thing. As if I needed another reason to marry him.

Armed with my new crafting tools, I knew exactly what I wanted to create. I was originally going to buy these on Etsy, but I really thought I could do them myself. Plus when you buy, you’re limited to certain styles and colors but with DIY you can literally pick anything. I was pleasantly surprised at how easy these were!

Directions
  • Buy wine bottles: this can be done based on the type of wine, price, or color of the top label
IMG_0643
I used Beringer “Pink Moscato” mainly for the pink top label

  • Remove wine labels: soak bottles in warm water and Oxy Clean (approximately 1 scoop) for 2 hours and the labels will rub right off
IMG_0648
As for the temperature, I used pretty warm water but not so hot that it may alter the quality of the wine
IMG_0650
The bottles are extremely slippery so be extra careful and be sure to rinse the bottles off before going on to the next steps
IMG_0652
Squeaky clean bottles!

  • Create new labels: using whatever font you like, create a label (I used Microsoft Word, font was “Jenna Sue”) and print on adhesive paper*, you should be able to fit at least 2 labels on each sheet
IMG_0654
*I had to go to Staples to print my labels because apparently if you don’t use your printer for over a year your ink cartridge dries out. This just goes to show you how much printing I’ve done since graduating college.
IMG_0655
  • Cut the personalized label down to size and adhere to cardstock/scrapbook paper cut down to preferred size.
IMG_0661
 IMG_0659
 Here are all the labels, waiting to be adhered to the bottles! I made one extra as a keepsake for us (far right)
IMG_0663
I used double-sided tape on the back of the cardstock to adhere the label to the bottle. As it turns out, double-sided tape is extremely hard to photograph…
IMG_0662
Just to be safe, I used 2 rubber bands to hold the labels in place until the tape was really stuck to the bottle.
IMG_0665
I left the rubber bands on for a few days.
IMG_0673
The finished product!
IMG_0677
Megan, Adrianna, Leah, Hilary, Shelby, Courtney, and Lesley: Casey & I love you all and we are so excited to have you celebrate our special day with us!

DIY Mercury Glass Lamps

Hello! I’ve been dreaming of this post for a while now so I’m super excited to share this DIY. A couple months ago I found these lamps for $4 each at a local thrift store:

IMG_1019

Ignore the beer in the background :) I can honestly say it’s for a craft project, you’ll see!

The shape is wonderful but the gold-bronze color is not in the color scheme for any room that I’ve designed in my head. And of course, all my favorite bloggers have taught me that literally anything can be totally altered with a little spray paint and some love. I was inspired by these lamps I found at Marshall’s:

IMG_1075

The best part is that my lamps work, so all the changes would be cosmetic, which is great because I’m certainly not an electrician. Here’s where this project got a little tricky though: I wanted to try mercury-glassing (yes, that’s a verb) the lamps, a la this tutorial, but I could not find the specific paint they used! It’s Krylon “Looking Glass,” and I searched Michael’s, Home Depot, Lowe’s, and finally found it at a Super WalMart, which just goes to show how desperate I was for these lamps!

IMG_1106

Spray paint has never smiled the way I did when I found these beauties!

First, I covered the electrical (?) pieces of the lamp with a Zip-Loc bag and some tape because I’m pretty sure paint, water, and vinegar do not mix well with electricity. I also covered the lamp cord with tape where it met the base of the lamp because I wasn’t sure if I should paint the cord itself. Now that I see the “finished” product, I’m planning on painting the cord silver as well.

IMG_1227

In order to get the mercury effect, I used the spray paint along with a small spray bottle of a mixture of half water and half white vinegar. I started with misting one lamp in the water/vinegar mixture, then a light coat of spray paint:

IMG_1228

IMG_1230

After one coat.

IMG_1232

You can see the vinegar eats away at the paint, which creates the mercury effect.

IMG_1235

After a few light coats, misting in between each coat.

I let the lamps dry for the day, and began my hunt for shades. It took a few tries but I ended up with two big, white shades for $15 each from my favorite place, Marshall’s!

IMG_1249

Finished product! I couldn’t resist the “&” I got at Marshall’s too!

I kept the plastic shade covers on because I’ll be moving in a couple months and I don’t trust myself not to destroy them. Plus, they don’t exactly have a spot in my current house so they are resigned to my desk for now.

IMG_1253

Close ups.

IMG_1254

**Important Note** My lamps are not made of glass, so they did have the exact mercury glass effect that I saw on other lamps. I knew that going into it though so I was not disappointed at all. Obviously if you are looking for something like what you’ve seen at a high-end store, try to find a glass lamp. I was perfectly happy with my two lamps for $36! I can’t wait to find a home for them when I move into our new place….which I am still working on obtaining. More on that to come.

And since it’s been a little while since I had a whole project to post about, so here are some of the other fun things that have been happening in my life:

IMG_1233

Birthday hike with Casey at Bishop’s Peak

My mom and Casey both came for a few days so you can blame them for my lack of posting in April. As for photographic evidence of my mom’s visit, that would entail confidential wedding information that cannot be leaked at this time.

IMG_1195

Feeding my new Chia seed obsession

IMG_1293

Renewed my passport and booked my trip to Europe this July!!

IMG_1291

Planted my succulents

IMG_2807

Most exciting of all, as you can probably see by my new banner above, we got our engagement pictures!!! Done by the wonderful Heather Armstrong. She’s a super genius and I want to print these pictures and make wallpaper out of them. Just kidding. But really.

DIY Jewelry Stand

A few weekends ago, my roommate and I made a quick trip to Cambria, CA to scope out their antique stores. Cambria is an adorable little beach town with a ton of antiquey-thrift stores about 30 minutes from our house. I was looking for some cool plates to make a 3-tiered jewelry stand and was so pleased to have found these three adorable plates.

IMG_1168

I picked them because of the cute details on the outer edge of the plate, knowing I would be painting over the floral design and the landmarks of Long Beach (upper left plate). I think the edge details complement each other without being too matchy. I used Krylon’s White Gloss spray paint and started with quick, light coats:

IMG_1205

IMG_1174

Bye bye flowers!

IMG_1172

Because the plates had some very small details, I used a toothpick to poke where the spray paint started to pool in the holes. I did this after each coat, mainly because I struggle with the term “quick light coats” and I’m also extremely impatient for each coat to dry, whether it be nail polish or spray paint. Moving on!

IMG_1177

IMG_1178

IMG_1176

LOVE the way they turned out, they look so crisp and white! I was worried that they would actually look painted, but I think they just look like white plates. The next step was creating the tiers, using votive holders from Michael’s. The votive holders from the Dollar Store were way too tall for my purpose, but they would be perfect if you were making a cupcake holder and needed more space between each tier.

IMG_1206

IMG_1207

I placed glue around the bottom of the votive holder and pressed firmly, careful not to let it slide around on the plate. I put some books on top to keep weight on it until the glue completely dried. I waited 24 hours for the glue to dry, just to be safe. Then I repeated these steps until all three tiers were done.

IMG_1222

IMG_1223

Isn’t it cute?!

IMG_1227

The view from this angle makes it look off-center and unbalanced, but it is actually level in person. My new jewelry stand sits on my dresser and holds bobby pins, hair ties, contact case, and other items that don’t quite have a home.

IMG_1221

And because I just can’t resist taking pictures of it, I’ll show you that it also holds my beautiful ring when I’m doing housewifey things like washing dishes and kneading homemade dough. Because I totally do those things all the time.

To recap, I used the following for this project:

  • Three dishes
  • Krylon Gloss White spray paint (if you find plates that match, you don’t need paint)
  • Toothpicks (if your plates have any cut-outs)
  • Two votive holders
  • Household glue

IMG_1222

This is where it sits on my dresser, which was one of my very first DIY projects (pre-blog, so I have very little documentation of the transformation). It was my first furniture refinish and I learned a LOT, so I’m getting very antsy to do more big projects like this one.

What projects, big or small, have you been looking to tackle lately? Any good thrift store finds?

DIY Anthropologie Confetti Wine Glasses

The most important lesson I have learned since graduating college (9 months ago?!? What?!) is the importance of a relaxing glass of wine after a long day. Okay so maybe that’s not the most important lesson but sometimes, it’s just necessary to pour yourself a glass of wine and decompress. As one of my dear friends and roommates is quickly approaching her graduation in a few weeks, I was fairly certain what would make a wonderful gift to commemorate the occasion: a set of hand-painted, stemless wine glasses, waiting to be filled with a celebratory beverage.

I was inspired by this post at Radial Possibility, who has some amazing Anthropologie knock-offs. Plus she’s hilarious so she’s got that going for her as well. I trekked over to Marshall’s on my lunch break last week and picked up these bad boys:

IMG_1126

I like the red wine glasses better because they’re shorter but you could definitely use either one.

IMG_1133

I already had these ceramic and glass paints on hand from other projects but you can buy them at any craft store. From there, I began the painting process. It’s very a very complicated method so pay close attention: Make dots. On the glass. In no particular order. Did I just blow your mind?

IMG_1136

I put rubber bands at about the same level on each glass so the dots would be somewhat even.

Once you are happy with the confetti amount, place the glasses in a cool oven and set temperature for 425° for 30 minutes. Turn off the oven at 30 minutes and leave the glasses in the oven until cooled. This sets the paint, so it should be washable. Because I am giving these as a gift, I won’t test them first but simply cross my fingers and hope the paint stays!

IMG_1151

Vwa-lah! Finished product.

IMG_1148

These turned out sooo cute, I really hope that the paint holds up to washing. The color possibilities are endless, I’m thinking I’ll make some with gold and silver for the holiday season. So fill up your glass with some cheap champagne and toast to success, congratulations Hil!

DIY Sunburst Mirror

I’ve recently been looking for ways to spice up the boring white walls in my bedroom (oh, the joys of renting!). I used to have a hand-painted canvas above my bed and the birds matched my sheets, but then I changed my sheets to tan and the whole look was off.

IMG_1084

Canvas from Michaels + silver paint + black paint + paper birds cut from a Cricut

Then I found this DIY Starburst Mirror on Pinterest and fell in love! I had been looking at similar wall art that was much pricier so I was super excited to see a DIY version. I highly recommend taking a visit to her blog too, it’s inspiring on a creative level and  on a personal one.

I had some of the supplies already on hand (spray paint, hot glue) but I made my weekly trip to Michaels to get the rest: 75 wooden dowels8-inch round mirror, and picture hanging hooks. I was surprised how many dowels it took to finish. I thought I would have extra, but I had barely enough.

IMG_0820

Here it is about 3/4 of the way done. I drew lines with a ruler but it looked a little too exact so I just eye-balled it.

I started hot gluing, trying to mix up the lengths to keep it interesting. After all of the dowels were glued on securely, I covered the mirror with tin foil and spray-painted it Krylon Chrome. Once dry, I attached the wall hook to the back of the mirror with a magical mixture of super glue and hot glue. I tested the hook about a million times because I knew this was going above my bed and I prefer not to be impaled by a mixture of glass and wood in the middle of the night.

IMG_1078

And here it is, fully installed! Oh, and say hi to Muffin, my early Valentine’s Day gift.

I really love how it turned out, especially for such an inexpensive DIY. I could have gone with a color that popped more against the white wall but I did consider that someday soon (hopefully) we will have our own home that we can paint a dramatic color and the silver will really stand out.

I hope everyone has a great Super Bowl weekend! I have a lot of food ideas swirling around in my head for Game Day, and almost of them involve a hearty serving of Buffalo sauce. Can’t wait to show you what I come up with!